An HVAC technician carrying out a maintenance check on an outdoor unit in Montgomery, AL

HVAC Maintenance Plan in Montgomery, AL

The full 21-point audit, published here in full. Spring for cooling, fall for heating, and a written report every visit.

  • ✓21-point audit in full
  • ✓Call direct, no forms to fill
  • ✓Serving Montgomery, Prattville & Wetumpka

Published by the team at Cloverdale HVAC

THE ANSWER FIRST

What is the HVAC maintenance plan?

HVAC maintenance in Montgomery, AL is two scheduled visits a year, spring for cooling and fall for heating, built around a 21-point audit that is published in full on this page. Every visit checks the same 21 points, in the same order, and ends with a written performance report that says what was checked, what was found, what needs attention, and what can wait. There is nothing hidden about what the plan covers, because the list is right here.

Montgomery weather sets the calendar. Summer days reach 94 degrees, and the cooling system runs hard from late spring into early fall. Winter nights can fall to 14 to 18 degrees in a cold snap, and the heating system has to be ready before the first one. A spring check catches the cooling faults before the heat arrives, and a fall check catches the heating faults before the cold arrives. Filters change most often in peak summer, when the system runs longest.

The plan covers AC systems, furnaces, and heat pumps, in Montgomery, Prattville, and Wetumpka. One plan, one audit, one report. There is no second tier with different benefits on this page, because no second tier has been set.

A technician carrying out a spring cooling check on an outdoor unit in Montgomery, AL
A spring cooling check.

THE SEASONAL CALENDAR

When should I schedule the spring and fall checks?

Spring, in March or April, before the cooling season starts. The spring visit is the cooling check: coils, refrigerant, drain, temperature split, fan, capacitor, and contactor, plus the filter, the ducts, and the thermostat. A fault found in April is a repair on your schedule. The same fault found in July is a repair in 94 degree heat.

Fall, in October or November, before the heating season starts. The fall visit is the heating check: burner flames, heat exchanger, ignition, gas connections, flue, and the intake and exhaust pipes outside, plus the safety controls. A cracked heat exchanger or a blocked flue found in October is a repair before the first cold snap. Found in January, it is a repair with no heat in the house.

Filters sit outside the two visits. In peak summer the filter loads up fastest, and a clogged filter weakens airflow, strains the blower, and can freeze a coil. Change the filter every one to three months in summer, and note the size and type each time. The audit records the filter size and the next change date on every visit.

A clean pleated filter being fitted during a maintenance visit in Montgomery, AL
A clean filter being fitted.

THE FULL AUDIT

The 21-point maintenance audit, in full

Here is the whole audit, all 21 points, in the order the technician works through them. Nothing is left out, and nothing is summarised into themes. If a point is not on this list, it is not part of the audit.

Cooling: points 1 to 7

  1. 1.Filter: replace or clean, with the size and type noted and the next change date recorded.
  2. 2.Evaporator coil: clean, with a frost and dirt check.
  3. 3.Condenser coil: clean, with debris cleared from around the outdoor unit.
  4. 4.Refrigerant level and charge: checked against the manufacturer's targets and noted; technician only.
  5. 5.Condensate drain: cleared and flushed, with the float and safety switch tested.
  6. 6.Temperature split: supply versus return measured and recorded.
  7. 7.Outdoor fan, capacitor, and contactor: visual and electrical check.

Heating: points 8 to 13

  1. 8.Burner flames: inspected, with burner and blower cavities cleaned.
  2. 9.Heat exchanger: visual check for cracks, rust, and soot.
  3. 10.Ignition, pilot, and flame sensor: checked.
  4. 11.Gas connections and burner combustion: checked; technician only.
  5. 12.Flue: checked for gaps and dents, and confirmed venting outdoors.
  6. 13.Furnace intake and exhaust pipes outside: checked for ice, snow, nests, and debris.

Airflow and ducts: points 14 to 18

  1. 14.Blower components: cleaned and adjusted, with airflow checked at the vents.
  2. 15.Ducts: visual check of accessible runs for disconnection, crushing, and leaking.
  3. 16.Thermostat: checked and calibrated, with batteries where fitted.
  4. 17.Supply and return vents: checked open and unblocked.
  5. 18.Air handler and drain pan: checked for standing water, rust, and mould growth, and reported; no health diagnosis is made.

Safety and controls: points 19 to 21

  1. 19.Safety controls: tested, including the high-limit switch and the condensate overflow switch.
  2. 20.Electrical connections: tightened, with wiring checked; technician only.
  3. 21.Written performance report: what was checked, what was found, what needs attention, and what can wait, with the green, yellow, and red summary.

Two notes on the list. Gas, electrical, and refrigerant points are technician-only, and the list says so where it applies. The heat exchanger check is a visual check, and a crack found by eye is reported at once.

THE REPORT

What does the written performance report tell you?

Every visit ends with a written performance report. It lists what was checked, what was found, what needs attention, and what can wait. The findings are sorted with a traffic-light summary, so the report can be read in a minute and kept for the record.

  • Green means the point checked out, and nothing is needed now.
  • Yellow means the point needs attention soon, but the system is safe to run. A filter due for a change, a coil starting to load up, or a capacitor reading low all sit here.
  • Red means the point needs action now, or the system should not run until it is fixed. A cracked heat exchanger, a gas leak, or a failed safety control sits here, and the visit says so in plain words.

The report is yours to keep. It records the temperature split, the refrigerant readings against the manufacturer targets, the filter size and the next change date, and every yellow and red item with the next step named.

A written HVAC performance report with a green, yellow, and red summary in a Montgomery, AL home
A written performance report.

WHAT IT PREVENTS

Does maintenance really prevent breakdowns?

Maintenance prevents the breakdowns that come from neglect, and it catches the rest early. A clogged filter, a blocked drain, a dirty coil, and a loose electrical connection are all faults that build slowly and break suddenly, and all of them sit on the audit list. Finding them on a scheduled visit costs a visit. Finding them on a July afternoon costs a repair in 94 degree heat, or a night without cooling.

What maintenance cannot do is promise that nothing will ever break. A capacitor can fail without warning, and a compressor can fail on a system that was checked in spring. The audit catches the slow faults before they become sudden ones, and it gives you a written record, so a repair-or-replace decision is made from evidence, not from a surprise.

The repair-or-replace question comes up on every ageing system. Our page on AC repair in Montgomery covers the decision in full, and the maintenance report is the evidence it rests on. If the system is a heat pump, the heat pump repair page covers defrost and backup heat faults, and if the thermostat is drifting, the thermostat installation page covers compatibility and calibration.

Call to Join the Plan

A technician talking with a homeowner about the maintenance plan in Montgomery, AL
A technician talking with a homeowner.

COST

How much does the maintenance plan cost?

No price is published on this page, because the plan price depends on the system it covers. What changes the price is the number of systems in the home, the type of each system, and how easy the equipment is to reach.

The call is how the price is set. Describe the systems, and the written price comes before the first visit, with the spring and fall checks named as separate lines. There is no charge for asking, and the audit list above is the scope, so the price can be checked against the list before anything is agreed. The call also confirms which systems the plan covers, so the first visit arrives with the right filters and the right checks.

Before and after: maintenance visit in Montgomery

Before: a dirty duct interior with built-up debris
After: a clean duct interior after professional cleaningBeforeAfter

illustrative examples only

What to have ready when you call

Tell us what systems the house has and when they were last checked. The plan starts from the equipment, not from a form.

  • The type and age of each system in the home: AC, furnace, heat pump
  • The filter size and type for each system
  • When each system was last serviced, if you know
  • Any fault you have noticed: weak airflow, a smell, a noise, a room that never feels right
  • Whether the ducts have ever been cleaned or sealed, if you know

Have these notes by the phone. The call goes faster, and the technician arrives knowing what to look for.

QUESTIONS

What do Montgomery homeowners ask about the maintenance plan?

Twice a year: a spring check for cooling, in March or April, and a fall check for heating, in October or November. Filters change more often, every one to three months in peak summer. The two visits follow the same 21-point audit every time.

The fall visit covers burner flames, the heat exchanger, ignition and the flame sensor, gas connections, the flue, and the intake and exhaust pipes outside, plus the filter, the thermostat, and the safety controls. Each point is checked, and the findings go on the written report.

The spring visit covers the filter, both coils, the refrigerant charge, the condensate drain, the temperature split, and the outdoor fan, capacitor, and contactor, plus the blower, the ducts, and the thermostat. Each point is checked, and the findings go on the written report.

No price is published here, because the price depends on the system it covers. What changes it is the number of systems, the type of each system, and how easy the equipment is to reach. The written price comes before the first visit, with the spring and fall checks named separately.

It prevents the breakdowns that come from neglect, like a clogged filter, a blocked drain, a dirty coil, or a loose connection, and it catches the rest early. It cannot promise that nothing will ever break, but it gives you a written record, so repair-or-replace decisions rest on evidence.

Spring in March or April, before the cooling season, and fall in October or November, before the heating season. A fault found in April is a repair on your schedule. The same fault found in July is a repair in 94 degree heat, and in January it is a repair with no heat.

A homeowner asking a technician about the maintenance plan in a Montgomery, AL home
A homeowner asking a technician.

CALL NOW

Spring for cooling, fall for heating: join the plan before the season turns

Call now

Join the Plan? Call With Your System List

Tell us what systems the house has and when they were last checked. The HVAC maintenance plan in Montgomery is two visits a year, the full 21-point audit, and a written report every visit.

Call to Join the Plan

Plan ahead

Not Sure What Your System Needs? Read the Audit First

The full 21-point audit is published on this page, in full. Read it, then call, and the written price is set against that list before the first visit.

Every service page links back to the plan, because the audit is the record the rest of the work rests on.

A technician finishing a maintenance visit at a house in Montgomery, AL
A technician finishing a maintenance visit at a house.

Find us

HVAC maintenance plan in Montgomery: our Prattville base

Our base is at 714 E Main St in Prattville, a short drive up I-65 from Montgomery. Call (334) 555-0142, describe the systems in your home, and the first visit is scheduled.

  • Areas served: Montgomery, Prattville and Wetumpka, with the same visit process in each city.
  • What to have ready: the symptom, when it started, and the system brand and age if you know it.
  • How the visit works: the technician comes to your home. This address is the base the visit starts from.

Cloverdale HVAC 714 E Main St, Prattville, Alabama 36067, USA

Get Help NowServices