Published by the team at Cloverdale HVAC

An HVAC technician connecting refrigerant gauges to an outdoor air conditioning unit in Montgomery, AL

Which Refrigerant Does My AC Use?

Your AC uses exactly one refrigerant, and the nameplate on the outdoor unit names it. Read the nameplate first, and the repair-or-replace decision follows from what it says.

  • ✓21-point audit in full
  • ✓Call direct, no forms to fill
  • ✓Serving Montgomery, Prattville & Wetumpka

Which refrigerant does my AC use?

Your AC uses exactly one refrigerant, and the nameplate on the outdoor unit names it. It is usually R-22, R-410A, R-32, or R-454B. The nameplate is the only reliable source: the age of the system and the brand do not tell you on their own, and two systems of the same age can use different refrigerants.

The refrigerant matters because it decides what a repair can cost and whether a repair is worth doing. An R-22 system with a leak is a different decision from an R-410A system with the same leak, because R-22 is phased out. Read the nameplate first, and the decision follows from what it says.

  • Nameplate: the only reliable source for your refrigerant type.
  • R-22: phased out, no longer made.
  • R-410A: the common refrigerant in systems built over the last two decades.
  • R-32 and R-454B: the new low-GWP refrigerants in new systems.
  • Our page on repair or replace uses the refrigerant type as a tie-breaker.
An air conditioner nameplate on an outdoor unit in Montgomery, AL, showing the refrigerant type
An air conditioner nameplate in Montgomery, AL: which refrigerant does my AC use.

How do I read the nameplate?

The nameplate sits on the outdoor unit, usually on a side panel or near the electrical box. Look for the line that says refrigerant, and read the code next to it: R-22, R-410A, R-32, or R-454B. Note the model and serial numbers at the same time, because the technician will ask for them when you call.

Do not open any panel to find it. The nameplate is on the outside of the unit, and if you cannot see it from outside, leave it for the technician. Take a photo of it if you can read it safely, so you have the numbers ready when you call.

  • Outdoor unit: side panel or near the electrical box.
  • Refrigerant line: the code next to it, R-22, R-410A, R-32, or R-454B.
  • Model and serial numbers: note them at the same time.
  • Do not open any panel to find the nameplate.
  • Take a photo if you can read it safely, so the numbers are ready when you call.
A close-up of an air conditioner nameplate on an outdoor unit in Montgomery, AL
A close-up of an air conditioner nameplate in Montgomery, AL: how do I read the nameplate.

What changed with R-22, R-410A, R-32 and R-454B?

R-22 is phased out. It is no longer made, so repairs that need it get harder and more expensive each year, and a leak on an R-22 system is a stronger reason to replace than the same leak on a newer system. R-410A is the common refrigerant in systems built over the last two decades, and it is still widely used.

New systems now use R-32 or R-454B, lower-GWP refrigerants adopted industry-wide from January 2025. GWP means global warming potential, and lower means the refrigerant traps less heat if it escapes. Each system takes only the refrigerant named on its nameplate, and an old system cannot take a new refrigerant.

  • R-22: phased out, no longer made, repairs get harder each year.
  • R-410A: the common refrigerant in systems built over the last two decades.
  • R-32 and R-454B: new low-GWP refrigerants, adopted industry-wide from January 2025.
  • One refrigerant per system: the nameplate names the only one it can use.
  • Refrigerant work is technician-only, under EPA Section 608.
New refrigerant types R-32 and R-454B explained for Montgomery, AL homeowners
New refrigerants R-32 and R-454B: what changed with R-22, R-410A, R-32 and R-454B.

What does the nameplate decide: repair or replace?

The nameplate decides the repair-or-replace question together with the age and the cost. An R-22 system with a refrigerant leak tips toward replacement, because the refrigerant is phased out and the leak repair gets harder each year. An R-410A system with the same leak can still be worth repairing, if the leak is small and found early.

A working system does not need replacing because of the refrigerant change, and no rule says it does. Keep running it, keep the filter clean, and keep the maintenance visits going. The refrigerant matters when the system needs a repair that touches the refrigerant circuit, or when you are choosing a new system. Our page about repair or replace works the full decision from your written quote, with the refrigerant type as a tie-breaker.

  • R-22 plus a leak: tips toward replacement.
  • R-410A plus a small leak: can still be worth repairing.
  • Working system: no rule says it must be replaced because of the refrigerant change.
  • New system: R-32 or R-454B, with the rating on the quote. Our page about SEER2 explained covers the numbers.
  • Refrigerant top-up alone: the wrong answer. A system that needs refrigerant has a leak, and the leak is the repair.
An older R-22 air conditioning unit in a Montgomery, AL home
An older R-22 unit in Montgomery, AL: what does the nameplate decide.

Your questions, answered

Read the nameplate on the outdoor unit. It names the refrigerant, usually R-22, R-410A, R-32, or R-454B, alongside the model and serial numbers. The nameplate is the only reliable source: the age of the system and the brand do not tell you on their own. The section below shows where to find it and what each type means.

The nameplate sits on the outdoor unit, usually on a side panel or near the electrical box. Look for the line that says refrigerant, and read the code next to it: R-22, R-410A, R-32, or R-454B. Note the model and serial numbers too, because the technician will ask for them. Do not open any panel to find it.

R-22 is phased out, so it is no longer made and repairs that need it get harder each year. R-410A is the common refrigerant in systems built over the last two decades. New systems now use R-32 or R-454B, lower-GWP refrigerants adopted industry-wide from January 2025. Each system takes only the refrigerant named on its nameplate.

No. An old system cannot take a new refrigerant. R-410A systems cannot take R-32 or R-454B, and R-22 systems cannot take R-410A. The parts, the oil, and the pressures are different, and mixing them damages the system. The refrigerant on the nameplate is the only one that system can use.

No. A working system does not need replacing because of the refrigerant change, and no rule says it does. Keep running it, keep the filter clean, and keep the maintenance visits going. The refrigerant matters when the system needs a repair that touches the refrigerant circuit, or when you are choosing a new system.

A homeowner talking with an HVAC technician about refrigerants in Montgomery, AL
A homeowner talking with a technician in Montgomery, AL: your questions, answered.

Read the nameplate? Call with what it says

Call now

Found the Refrigerant on the Nameplate? Call With It

Tell the technician the refrigerant type and the model number. That is enough to start the visit.

Call About Refrigerant

Plan ahead

Want the Repair-or-Replace Side?

Read our page about repair or replace, the $5,000 rule and the 50% rule, worked from your written quote.

The nameplate is the only reliable source. Age and brand do not tell you on their own.

An HVAC technician talking with a homeowner about refrigerants in Montgomery, AL
An HVAC technician talking with a homeowner in Montgomery, AL: read the nameplate?

Find us

Find Cloverdale HVAC in Montgomery

Cloverdale HVAC 714 E Main St, Prattville, AL 36067.

Get Help NowServices